Filter
Top Products
agreed upon with your service provider, select Set by
network.
Outgoing call line — to select the phone line for making
calls, if your SIM card supports multiple phone lines (network
service)
Phone
Select Menu > Settings > Phone and from the following:
Language settings — to set the language of your phone,
select Phone language and a language. To set the language
of your phone according to the information on the SIM card,
select Phone language > Automatic.
Memory status — to check the memory consumption
Automatic keyguard — to lock the keypad automatically
after a preset time delay when the phone is in the home
screen mode and no function has been used
Security keyguard — to ask for the security code when you
unlock the keyguard
Sensor settings — to activate and adjust the tapping
function
Voice recognition —
See "Voice commands", p. 31.
Flight query — to be asked whether to use the flight mode
when you switch the phone on. With the flight mode, all radio
connections are switched off.
Phone updates — to receive software updates from your
service provider (network service). This option may not be
available, depending on your phone.
See "Software updates
over the air", p. 32.
Network mode — to use both the UMTS and the GSM
network. You cannot access this option during an active call.
Operator selection — to set a cellular network available in
your area
Help text activation — to select whether the phone shows
help texts
Start-up tone — to play a tone when you switch the phone
on
Voice commands
Call contacts and use your phone by speaking a voice
command.
Voice commands are language-dependent. To set the
language, select Menu > Settings > Phone > Language
settings > Phone language and your language.
To train the voice recognition of your phone to your voice,
select Menu > Settings > Phone > Voice recognition >
Voice recog. training.
To activate a voice command for a function, select Menu >
Settings > Phone > Voice recognition > Voice
commands, a feature, and the function.
indicates that the
voice command is activated.
To activate the voice command, select Add. To play the
activated voice command, select Play.
To use voice commands, see
"Voice dialling", p. 17.
Settings 31