Filter
Top Products
Request a software update
1 Select Menu > Settings > Phone > Phone updates to
request available software updates from your service
provider.
2 Select Current softw. details to display the current
software version and check whether an update is needed.
3 Select Downl. phone softw. to download and install a
software update. Follow the instructions on the display.
4 If the installation was cancelled after the download,
select Install softw. update to start the installation.
The software update may take several minutes. If there are
problems with the installation, contact your service provider.
Security
When security features that restrict calls are in use (such as
call barring, closed user group, and fixed dialling), calls may
be possible to the official emergency number programmed
into your device. Call barring and call diverting cannot be
active at the same time.
Select Menu > Settings > Security and from the following:
PIN code request or UPIN code request — to request for
your PIN or UPIN code every time the phone is switched on.
Some SIM cards do not allow the code request to be turned
off.
Call barring service — to restrict incoming calls to and
outgoing calls from your phone (network service). A barring
password is required.
Fixed dialling — to restrict your outgoing calls to selected
phone numbers if supported by your SIM card. When the fixed
dialling is on, GPRS connections are not possible except while
sending text messages over a GPRS connection. In this case,
the recipient’s phone number and the message centre
number must be included in the fixed dialling list.
Closed user group — to specify a group of people whom
you can call and who can call you (network service)
Security level — to request the security code whenever a
new SIM card is inserted into the phone, select Phone.
Access codes — to change the security code, PIN code, UPIN
code, PIN2 code, or barring password
PIN2 code request — to select whether the PIN2 code is
required when using a specific phone feature which is
protected by the PIN2 code. Some SIM cards do not allow the
code request to be turned off. This option may not be
available depending on your SIM card. For details, contact
your network operator.
Code in use — to select the type of PIN code
Authority certificates or User certificates — to view the list
of the authority or user certificates downloaded into your
phone.
See "Browser security", p. 40.
Security module sett. — to view Secur. module details,
activate Module PIN request, or change the module PIN and
signing PIN.
See "Access codes", p. 6.
Restore factory settings
To restore the phone back to factory conditions, select
Menu > Settings > Rest. factory sett. and from the
following:
Restore settings only — Reset all preference settings
without deleting any personal data.
Settings 33