Filter
Top Products
Get started
Install SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
This device is intended for use with a BL-4B battery.
Always use original Nokia batteries.
See "Nokia battery
authentication guidelines," p. 76.
The SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling,
inserting, or removing the card.
1.
Slide the release button (1) to unlock and remove the
back cover (2). Remove the battery as shown (3).
2.
Open the SIM card holder (4). Insert the SIM card (5)
with the contact surface facing down into the holder.
Close the SIM card holder (6).
3.
Observe the battery contacts (7), and insert the battery
(8). Place the upper part of the back cover on the device
(9), and close it (10).
Insert a microSD card
Use only compatible microSD cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
17