Filter
Top Products
damage the card and the device and corrupt data stored
on the card.
1. Switch the device off, and remove the back cover and
the battery of the device.
2. Slide the memory card
holder to unlock (1).
3. Open the card holder (2),
and insert the memory
card into the card holder
with the contact surface
facing inward (3).
4. Close the card holder (4),
and slide it to lock (5).
5. Insert the battery, and attach the back cover to the
device.
Charge the battery
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the
charger to the socket on the
bottom of your device.
If the battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the display
or before any calls can be made.
The charging time depends on the charger used. Charging
a BL-4B battery with the AC-3 charger takes approximately
2 hours and 15 minutes while the device is in the standby
mode.
18