Filter
Top Products
switched off. The flight profile should be used in areas
sensitive to radio emissions.
● Phone updates — to receive software updates from
your service provider (network service). This option
may not be available, depending on your device.
See
"Software updates over the air," p. 50.
● Operator selection — Select Automatic to set the
device to automatically select one of the cellular
networks available in your area. With Manual you can
select a network that has a roaming agreement with
your service provider.
● Confirm SIM actions —
See "SIM services," p. 72.
● Help text activation — to select whether the device
shows help texts
● Start-up tone — The device plays a tone when it is
switched on.
Enhancements
This menu or the following options are shown only if the
device is or has been connected to a compatible mobile
enhancement.
Select Menu > Settings > Enhancements. Select an
enhancement, and depending on the enhancement, from
the following options:
● Default profile — to select the profile that you want
to be automatically activated when you connect to the
selected enhancement
● Automatic answer — to set the device to answer an
incoming call automatically after 5 seconds. If
Incoming call alert: is set to Beep once or Off,
automatic answer is off.
● Lights — to set the lights permanently On. Select
Automatic to set the lights on for 15 seconds after a
keypress.
● Text phone — Select Use text phone > Yes to use
this setting instead of headset or loopset settings.
Configuration
You can configure your device with settings that are
required for certain services. Your service provider may
also send you these settings.
See "Configuration setting
service," p. 14.
Select Menu > Settings > Configuration and from the
following options:
● Default config. sett. — to view the service providers
saved in the device. To set the configuration settings
of the service provider as default settings, select
Options > Set as default.
● Activ. def. in all apps. — to activate the default
configuration settings for supported applications
● Preferred access pt. — to view the saved access
points. Scroll to an access point, and select Options >
Details to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up
number.
● Connect to support — to download the configuration
settings from your service provider
● Device manager sett. — to allow or prevent the
device from receiving software updates. This option
may not be available, depending on your device.
See
"Software updates over the air," p. 50.
● Personal config. sett. — to manually add new
personal accounts for various services and to activate
or delete them. To add a new personal account if you
49