Filter
Top Products
67
The following is an example of a number you could store
in your phone:
This number contains a phone number (18005551212), a
wait character, an access number (‘1234’), a wait charac-
ter, and a password (‘3434’) - 18005551212w1234w3434.
When you recall this number from memory and press
SEND, the phone:
• Dials 18005551212 (the stored number), then:
• ‘Waits’ for you to press SEND again. When you do,
the phone sends the numbers 1234.
• ‘Waits’ for you to press SEND again, then sends the
numbers 3434.
The following example shows storing ‘pause’ characters
as well as ‘wait’ characters (Note that a ‘wait’ character
must still be included, as shown, to separate the phone
number from the following digits):
18005551212w1234p3434
When you recall this number from memory and press
SEND, the phone:
• Dials 18005551212 (the stored number), then
• ‘Waits’ for you to press SEND again. When you do,
the phone sends the numbers 1234. It then:
• Pauses for 2.5 seconds, then sends the numbers
3434.
Note: If the keypad tones have been set to Off, the Touch
Tones will still be sent, but you will not hear them.
Pressing MENU SEND sends a displayed number as a
Touch Tone.
To end the call, press END after the phone sends the
Touch Tones and has returned to the normal call mode.