Filter
Top Products
Nokia 2260 User Guide 57 Copyright © 2003 Nokia
Note:
You can select a default profile that will be associated with each
accessory, such as
Normal
. However, the
Accessory settings
menu will
not appear until after an accessory has been connected to the phone at
least once.
SET UP THE LOOPSET
When you want to use the loopset, you will have to activate the accessory setting.
1
Attach the loopset to the phone.
2
Press
Menu 4-4-3
(
Settings > Accessory settings > Loopset
).
3
Scroll to
Use loopset
, then press
Select
.
4
Scroll to
Yes
, then press
Select
.
AUTOMATIC ANSWER
This feature lets your phone answer incoming calls after just one ring when an
accessory is connected to the phone.
1
Press
Menu 4-4
(
Settings > Accessory settings
).
2
Scroll to
Headset
,
Handsfree
, or
Loopset
, then press
Select
.
3
Scroll to
Automatic answer
, then press
Select
.
4
Scroll to
On
and press
Select
.
SET THE LIGHTS (CAR KIT ONLY)
When your phone is connected to a car kit, you have a choice of having the phone
lights on (a) continuously or (b) only when you use it.
1
Press
Menu 4-4-2-3
(
Settings > Accessory settings > Handsfree > Lights
).
2
Choose one of the following options, then press
OK
:
On
: The lights will remain on while the phone is connected to the car kit.
Automatic
: The lights will be turned on only when the phone is being used.
SET THE DEFAULT PROFILE
When you use the headset, car kit or loopset, you have the option of selecting a
default profile. You can use the currently selected profile (for example,
Normal
) or
you can choose from the list.
1
Press
Menu
4-4
(
Settings > Accessory settings
).
2
Scroll to
Headset
,
Handsfree
or
Loopset
, then press
Select
.
3
Scroll to
Default profile
, then press
Select
.
4
Scroll to the profile you want, then press
Select
.
Note:
The
Active profile
uses the current profile setting you have selected
for your phone.
2260.ENv1_9355957_.book Page 57 Wednesday, February 26, 2003 11:27 AM