Filter
Top Products
[ 105 ]
Security and System settings
UNLOCK KEYPAD
Press Unlock followed by */+ (within three seconds) to deactivate
Keyguard and unlock your phone keypad.
Important: When the phone is locked, calls may be possible to the
emergency number programmed into your phone (for example, 911
or other official emergency number).
• SECURITY CODE
Your phone prompts you for a five-digit security code for certain features
and commands. Access is granted only after the correct security code has
been entered successfully. The default security code is
12345
. It is
recommended that you change this code at once, write it down, and store
it in a safe place away from your phone.
Important: When entering your security code, ***** is displayed
on the screen to keep others from viewing your code.
Correct entry errors
You can delete the last entered digit by pressing Clear (or by pressing and
holding Clear to delete all the digits more quickly). Enter the correct code or
press Back to exit. If you enter an incorrect security code, Code error will
appear five times in a row, and your phone will not accept any entries for
the next five minutes.
Change your security code
1 Press Menu 4-5-2-4 (Settings > Security settings > Access codes
> Change security code) and press Select.
2 Enter the existing (or default) security code and press OK.
3 Enter the new five-digit security code and press OK.
4 Reenter the new five-digit security code for verification, then press
OK.
Your phone displays the confirmation message Security code changed.