Filter
Top Products
[ 48 ]
2 After the tone, clearly speak the voice tag that you recorded previously into the microphone.
Note: If the voice tag is not recognized by the phone or if you fail to speak a tag
within three seconds after the tone, the message Name not recognized is displayed,
and you are returned to the start screen.
3 When the voice tag is recognized,
• The phone book entry will be displayed on the screen for three seconds
AND
• The voice tag is replayed (through the ear piece).
After three seconds, the number is dialed.
The only other option for initiating voice dialing is to press the headset button momentarily at
the start screen. The alert tones play through the headset.
Speak the voice tag into the headset microphone. The voice tag will playback through the
headset to confirm your choice.
Work with voice tags
You can listen to an existing voice tag (in case you forgot what you recorded), rerecord a voice
tag, or delete an existing tag.
1 At the start screen, press Contacts. Scroll to Voice tags, then press Select.
Note: This option displays a list of only those contacts and numbers that have been
assigned a voice tag.
2 Scroll to the phone number voice tag you want to edit, then press Options.
3 Scroll to either Playback, Change, or Delete, and press Select. If you chose Change, press
Start to begin rerecording. The new tag that is recorded replaces the old information.
• 1-TOUCH DIALING
When a phone number is assigned to one of the 1-touch dialing locations (2-9), you can call
the phone number in either of the following ways:
• Press the number key that corresponds to a 1-touch dialing location and press the Send key.
• Press and hold the number key that corresponds to a 1-touch dialing location until the call
is initiated.
1 is preassigned to dial your voice mailbox number and cannot be reassigned.
Set up 1-touch dialing
If you want to assign a number to one of the number keys (2-9), do the following:
1 Press Contacts.
2 Scroll to 1-touch dialing and press Select.
3 Scroll to the desired number key (2-9), and press Assign.
Note: If a phone number is already assigned to a key, the phone book entry name is
displayed and the left selection key is Options.