Filter
Top Products
[ 61 ]
Organizer
3 To add, press */+ once (+ appears); to subtract, press */+ twice ( - ); to multiply, press */+ three
times ( * ); to divide, press */+ four times ( / ).
4 You can also press Options, scroll to Add, Subtract, Multiply, Divide, Square, or Square
root, and press Select.
5 Enter the second number.
Repeat steps 3 and 4 as many times as necessary.
A subtotal is shown after you enter the next operand (+, -, *, or /).
6 For a total, press Options twice.
7 To start a new calculation, press and hold Clear for two seconds.
Note: This calculator has limited accuracy and rounding errors may occur, especially
in long divisions.
•STOPWATCH
You can use your phone Stopwatch feature to time an event in hours, minutes and seconds.
The event time can be saved, viewed, or deleted.
Warning: Your phone must be switched on to use this function. Do not switch the
phone on when wireless phone use is prohibited or when it may cause interference or
danger.
Important: Using the stopwatch consumes the battery and the operating time of the
phone will be reduced. Be careful not to let it run in the background when performing
other operations with your phone.
Time an event using split timing
The split time function allows you to measure the total time for an event, yet allows you to
capture the elapsed time at various intervals. To measure split time:
1 From the Organizer menu, scroll to Stopwatch and press Select.
2 Scroll to Split timing, then press Select.
3 Press Start.
The running time appears on the display.
Once the split timer has started, you can:
• Press Split to display the split time while the timer continues to display elapsed time.
• Press Stop to stop the timer and view the total elapsed time.
If you continue pressing Split, the most recent split time appears at the top of the list of split
times. You can scroll to review previous times.
View timing options
Once you have stopped timing an event (using lap or split), you have the option to save the
information, reset the stopwatch, or continue timing (split timing only).
While stopwatch is running, press Stop, then press Options. Select one of the following:
• Save save the current timing data. Enter a name, then press OK.