Filter
Top Products
Set up your phone
15
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the
power key on top of the phone for at least 3
seconds.
2. Enter the security code if necessary and press
OK. See Security code, 69 for more information.
■ Connect the headset
A compatible headset may be purchased with
your phone or separately as an enhancement.
(See Enhancements, 99 for information.)
1. Plug the headset connector into the Pop-
Port™ connector at the bottom end of your
phone.
2. Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the Send key to place a call.
• Press the End key to end a call.
■ Change the Cut-Out™ covers
Note: Before removing the cover, always switch off the power
and disconnect the charger and any other device. Avoid touching
electronic components while changing the covers. Always store
and use the device with the covers attached.
Remove the back cover and the battery
See Remove the back cover, 13 and Remove the battery, 14 for
instructions on removing the back cover and battery.