Voice (Menu 10)
72 Copyright © 2004 Nokia. All rights reserved.
5. Press Start, and speak the voice
tag clearly into the microphone.
Note: Do not press Quit
unless you want to cancel the
recording.
The phone replays and then saves
the recorded tag. The icon
appears next to commands which
have voice tags assigned.
Activate a voice command
After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts (or Go
to).
2. When Speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found: appears, and the phone plays
the recognized voice tag through the
ear piece. The function you
requested is activated.
Options
After you have associated a voice
tag to a command, you can choose
one of the following options:
• Select Playback to listen to the
voice command tag.
• Select Change to change the
voice command.
• Select Delete to erase the voice
command tag.
■ Voice recorder
This feature allows you to record
pieces of speech or sound with your
phone and listen to them later. The
total available time is 180 seconds if
no memos have been stored. The
maximum length of a recording
depends on how much memory
remains available.
Record speech or sound
1. At the standby screen, select
Menu > Voice > Voice recorder >
Record and press Select.
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
press Stop.
4. Enter the title you wish to assign
to the recording and press OK.
Options
After you have saved the recording
to the Recordings list, highlight the
recording and choose one of the
following options:
