Settings (Menu 4)
Copyright © 2004 Nokia. All rights reserved. 51
Access no.+ card no.+ phone no.
— Dial access number, card
number (+ PIN if required), then
phone number
Prefix+ phone no.+ card no. —
Dial the prefix (numbers that
must precede the phone number)
and phone number you want to
dial, then card number (+ PIN if
required)
5. Enter the required information
(access number or prefix and card
number) and press OK to confirm
your entries.
6. Scroll to Card name and press
Select.
7. Enter the card name and press
OK.
Note: Contact your calling
card company for more
information.
Make calls
After you have saved your calling
card information in your phone, you
can make a call using your calling
card.
1. At the standby screen, select
Menu > Settings > Call settings
> Calling card and press Select.
2. Enter your security code and
press OK. (See ”Security code” on
page 60.)
3. Scroll to the calling card of your
choice, select Options > Select >
OK.
4. Press the End key to return to the
standby screen; then enter the
phone number, including any
prefix (such as 0 or 1), that your
calling card may require when
you make a calling card call.
See your calling card for
instructions.
5. Press and hold the Send key for a
few seconds until Card call is
displayed.
6. When you hear the tone or
system message, press OK.
Receive data or fax calls
Data or fax calls is a network service.
See ”Network services” on page 9 for
more information.
If your wireless service provider
supports this feature, then you can
set up the phone to send or receive
data or fax calls when a terminal,
such as a PDA or PC, is connected.
For better performance during data
calls, place the phone on a
stationary surface with the keypad
facing downward. Do not move the
phone by holding it in your hand
during a data call.
Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
http://www.nokia-asia.com.
