Filter
Top Products
General information
10
The module PIN is required to access the information in the security
module. See Security module p. 87.
The signing PIN is required for the digital signature. See Digital
signature p. 89.
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using the Call barring
service. See Security p. 57.
■ Configuration settings service
To use some of the network services, such as the mobile Internet
services, MMS, or remote Internet server synchronization, your phone
needs the correct configuration settings. You may be able to receive the
settings directly as a configuration message. Upon receiving the
settings, you need to save them to your phone. The service provider may
provide a PIN that is needed to save the settings. For more information
on availability, contact your network operator, service provider, nearest
authorized Nokia dealer, or visit the support area on the Nokia Web site:
<www.nokia.com/support>.
When you have received a configuration message, Configuration sett.
received is displayed.
To save the settings, select Show > Save. If the phone requests Enter
settings' PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider that supplies the
settings. If no settings are saved yet, these settings are saved and set as
default configuration settings. Otherwise, the phone asks Activate saved
configuration settings?.
9238054_en_3.fm Page 10 Friday, January 26, 2007 2:21 PM