Filter
Top Products
Settings
53
To deactivate the IR connection, select Menu > Settings >
Connectivity > Infrared. When the phone displays Deactivate infrared?,
select Yes.
If data transfer is not started within 2 minutes after the activation of
the IR port, the connection is cancelled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and
your phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or
a connection has been lost.
Packet data (EGPRS)
Enhanced general packet radio service (EGPRS), packet data, is a
network service which allows mobile phones to send and receive data
over an Internet protocol (IP)-based network. It enables wireless access
to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions,
e-mail, remote SyncML, Java application downloading, and the PC
dial-up.
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data connection.
Select When needed to set the packet data connection to be established
when an application needs it. The connection will be closed when the
application is terminated.
Select Always online to set the phone to automatically connect to an
packet data network when it is switched on.
indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42)
connection to a compatible PC, and use the phone as a modem to enable
packet data connectivity from the PC.
9238054_en_3.fm Page 53 Friday, January 26, 2007 2:21 PM