Filter
Top Products
Settings
54
To define the settings for connections from the PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active
access point, activate the access point you want to use, and select Edit
active access point. Select Alias for access point, and enter a nick name
for the currently selected access point. Select Packet data access point,
and enter the access point name (APN) to establish a connection to an
EGPRS network.
You can also set the dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See PC Suite p. 90. If you
have set the settings both on the PC and on your phone, the PC settings
are used.
■ Call
Select Menu > Settings > Call and from the following options:
Automatic volume control — to set the phone to automatically adjust
the speaker volume according to the background noise
Call divert (network service) — to divert your incoming calls. You may
not be able to divert your call, if some call barring functions are active.
See Call barring service in Security p. 57.
Anykey answer > On — to answer an incoming call, briefly press any key,
except the end key and the left and right selection keys.
Automatic redial > On — to set your phone to make a maximum of 10
attempts to connect the call after an unsuccessful call attempt
Speed dialling > On — to activate speed dialling. To set up speed dialling,
see Speed dials p. 47. To dial, press and hold the corresponding number
key.
Call waiting > Activate — to set the network to notify you of an
incoming call while you have a call in progress (network service). See
Call waiting p. 21.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID (network service) > Yes, No, or Set by network
9238054_en_3.fm Page 54 Friday, January 26, 2007 2:21 PM