Filter
Top Products
Push to talk
64
• To set the PTT settings for use, select PTT settings.
• To set the required settings for the PTT connection, select Config.
settings.
• To open the browser and to connect to the PTT network portal
provided by the service provider, select Web.
■ Connect to and disconnect PTT
To connect to the PTT service, select Menu > Push to talk > Switch PTT
on. indicates the PTT connection. indicates that the service is
temporarily unavailable. The phone automatically tries to reconnect to
the service until you disconnect from the PTT service. If you have added
groups to the phone, you are automatically joined to the active (Default
or Listened) groups, and the name of the default group is displayed in
the standby mode.
To disconnect from the PTT service, select Switch PTT off.
■ Make and receive a PTT call
Set the phone to use the loudspeaker or earpiece for PTT
communication.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the PTT service, you can make or receive dial out
calls, group calls or one-to-one calls. One-to-one calls are calls you
make to only one person.
Make a dial out PTT call
For a dial-out PTT call you can select multiple PTT contacts from the
contact list. The recipients get an incoming call and need to accept the
call in order to participate. A dial out call creates a temporary group and
the participants join this group only for the duration of the call. After
the call the temporary dial out group is deleted.
Select Menu > Push to talk > Contacts list and mark the desired
contacts for the dial-out call.
9238054_en_3.fm Page 64 Friday, January 26, 2007 2:21 PM