Filter
Top Products
Messages
25
Note: Picture message function can be used only if it is supported by
your network operator or service provider. Only compatible devices that
offer picture message features can receive and display picture
messages. The appearance of a message may vary depending on the
receiving device.
At the top of the display, you can see the message length indicator that
tracks the number of characters available. For example, 10/2 means that
you can still add 10 characters for the text to be sent as two messages.
Write and send a SMS message
1. Select Menu > Messages > Create message > Text message.
2. Enter a message. See Write text p. 22. To insert text templates or a
picture into the message, see Templates p. 26. Each picture message
comprises several text messages. Sending one picture or multipart
message may cost more than sending one text message.
3. To send the message, select Send > Recently used, To phone number,
To many, or To e-mail address. To send a message using a predefined
message profile, select Via sending profile. For the message profile,
see Text and SMS e-mail p. 38. Select or enter a phone number or e-
mail address, or select a profile.
Read and reply to a SMS message
is shown when you have received a message or an e-mail using
SMS. The blinking indicates that the message memory is full. Before
you can receive new messages, delete some of your old messages from
the Inbox folder.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messages > Inbox. If more
than one message has been received, select the message that you
want to read. indicates an unread message.
2. While reading a message, select Options and delete or forward the
message, edit the message as a text message or an SMS e-mail,
rename the message you are reading, move it to another folder, or
view or extract message details. You can also copy text from the
9238054_en_3.fm Page 25 Friday, January 26, 2007 2:21 PM