Filter
Top Products
Settings
43
■ Phone settings
Phone language
1. In the standby mode, select Menu > Settings > Phone settings > Phone language.
2. Select the language of your choice.
The phone language affects the time and date formats of the clock, alarm clock,
and calendar.
Automatic keyguard
You can set the keypad of your phone to lock automatically after a preset time
delay (from 10 seconds to 60 minutes).
1. In the standby mode, select Menu > Settings > Phone settings >
Automatic keyguard > On or Off.
2. If you selected On, Set delay appears in the display.
3. Enter the delay (in minutes and seconds), and select OK.
Important: When keyguard is on, calls may be possible to dial the
emergency number programed into your phone. Key in the emergency
number, and press the call key.
Touch tones
Touch tones or DTMF tones, are the tones that sound when you press the keys on your
phone keypad. You can use touch tones for many automated dial-up services such as
banking and airlines, or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from
your phone keypad, or send them automatically by saving them in your phone.
Set type
In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Manual touch tones and one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
In the standby mode, select Menu > Settings > Phone settings > Touch tones >
Touch tone length > Short (0.1 seconds) or Long (0.5 seconds).