Filter
Top Products
Settings
50
When the device is locked, calls still may be possible to the official emergency
number programed into your device.
Call not allowed is displayed if you attempt to place a call while phone is locked.
To answer a call with phone lock on, select Answer or press the call key.
1. In the standby mode, select Menu > Settings > Security settings.
2. Enter the lock code, and select OK. See "Lock code," p. 50.
3. Select Phone lock > On or Off.
On power-up—Requires a lock code to turn the phone on.
If you selected On, you must enter your lock code and the lock code must be
accepted before the phone will function normally.
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
following numbers:
• The emergency number programed into your phone (for example, 911).
• The number stored in the Allowed number when lock active location.
1. In the standby mode, select Menu > Settings > Security settings.
2. Enter the lock code, and select OK. See "Lock code," p. 50.
3. Select Access codes > Allowed number when lock active.
4. Enter the phone number, or select Search, and recall the number from the
phone book; select OK.
Call the allowed phone number
1. In the standby mode, scroll up or down.
2. Press the call key to place the call.
Lock code
When you change your lock code, make sure you store it in a safe place, away
from your phone. Avoid entering access codes similar to emergency numbers
such as 911to prevent accidental dialing of the emergency number.
The preset lock code is 1234. If you enter an incorrect lock code five times in a
row, your phone will prompt you for the security code. If you enter the wrong lock
code five times in succession, you will not be able to enter a code for 5 minutes,
even if you power off the phone between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings.
2. Enter the current (or default) lock code, and select OK.