Filter
Top Products
Settings and tools
41
Notepad
To create a note, select Menu > Settings & Tools > Tools > Notepad > New, enter
your note text (see "Text entry," p. 18), and select SAVE. To view or edit a note,
highlight the note, and select VIEW > Edit. To delete one note or all notes, select
Notepad > Options > Erase or Erase All.
Stop watch
The stop watch can be used for elapsed time measurement, such as for a sporting
event. Up to six events or records can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional instrument.
Therefore, Nokia advises against its use for official competitions or any other event
in which a high-precision device would be required to establish exact times.
To time a single event, select Menu > Settings & Tools > Tools > Stop Watch > Start.
The elapsed time is displayed in h:mm:ss:ms format. To stop or pause the stop watch,
select Stop. To resume the stop watch from the stopped time, select Start again. To
reset the stop watch to zero, select Reset with the watch in stopped mode.
To time multiple events, select Menu > Settings & Tools > Tools > Stop Watch >
Start. To mark the elapsed time for each event you are measuring, select Cont
(up to six times). To display the event times, select View.
■ Sounds settings
To adjust volumes and assign sounds to phone calls and alarms, select Menu >
Settings & Tools > Sounds Settings and from the following options:
Master Volume—Use the volume keys or scroll key to change the volume setting
of your phone from High to Low or to Alarm Only or Vibrate Only, then select OK.
To silence the phone, scroll down, or press and hold the volume down key until
All Sounds Off is displayed. To preview the sound level, select Play.
Call Sounds—To set ringtones for incoming calls, select Call Ringtone. To set the
phone to vibrate when a call is received, select Call Vibrate > On.
Alert Sounds—Select the alert type (Tone, Vibrate, or Reminder) for an incoming
TXT Message, PIX Message, or Voicemail Msg.
Keypad Volume—Use the volume keys or scroll key to set the keypad volume from
Off to High.
Earpiece Volume—Use the volume keys or scroll key to set the earpiece volume
from Low to High.
Service Alerts—Set any of the alert options to On or Off: