Filter
Top Products
Set up video sharing
To set up video sharing, you need person-to-person and 3G connection settings.
A person-to-person connection is also known as a Session Initiation Protocol (SIP)
connection. Contact your network service provider for the SIP profile settings, and
save them to your phone. Your network service provider may send you the settings
in a configuration message or give you a list of the needed parameters.
Set up a person-to-person connection
1Select
> Settings.
2Select Connectivity > Admin. settings > SIP settings and a SIP profile.
3 Type in the needed SIP profile settings.
Change video sharing settings
Select
> Settings and Connectivity > Video sharing.
Use a 3G connection
For details about networks, contact your network service provider.
Add a SIP address to a contact
1Select
> Contacts.
2 Select a contact and
3Select > Share video.
4 Write the SIP address in the format username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact, you can use the phone number
of the recipient, including the country code, to share video (if supported by the
network service provider).
Share live or recorded video
During an active voice call, select
> Share video.
1 To share live video, select Live video.
To share a video, select Video.
2 Select the desired SIP address or phone number that is stored in the contact card
for the recipient. If the SIP address or phone number is not available, manually
type in the details, then select OK. If typing in a phone number, you need to type
in the country code. The invitation is sent to the SIP address.
If you access another application while sharing a video, the sharing is paused.
48 Telephone