Filter
Top Products
Settings
100
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SmartChip is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement configuration
In the idle screen, indicates a headset is connected,
and that the headset is unavailable, or a Bluetooth
connection to a headset is lost. indicates a loopset is
connected and that a TTY is connected.
Select Headset, Loopset, TTY, Bluetooth handsfree, or
Music stand and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 87.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
TTY.
Lights (for music stand only)—Set whether lights remain
on, or are switched off after the time-out.
If you are using a TTY, you must activate it on your device.
Press , and select Settings > Config. >
Enhancement > TTY > Use TTY > Yes.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 59.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice cm.
application and its Profiles folder. Press , and select
Settings > Voice cm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold in the idle screen,