Filter
Top Products
Settings
96
Scan for networks—If you set Show availability to Yes,
select how often the device searches for available wireless
LANs and updates the indicator.
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
Configs.
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SmartChip. You can
save these settings to your device, view, or delete them in
Configs..
SIP settings
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your network
operator or service provider. You can view, delete, or
create these setting profiles in SIP settings.
Date and time
See ‘Clock settings’, p. 14, and language settings in
‘General’, p. 90.
Security
Phone and SmartChip
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SmartChips. See ‘Glossary of PIN and
lock codes’, p. 97.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 97.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.