Panasonic EB-X500 Cell Phone User Manual


 
Basic Operation 9
Making a Call
The phone is switched on, the signal strength meter shows network coverage is
available in the current area, and the battery has sufficient charge.
Entering numbers
You need to have the area code and the phone
number before you call.
In idle screen
1. Enter the area code and phone number with
#,
2. The entered number is displayed
3. Press C (Send)
Ending a call
When you end a call, the duration of the call will be displayed. If Max Cost (see
“Max cost” on page 35) is set, the remaining units will also be displayed.
While on a call
1. Press D (Power/End)
OR
Close the phone body
(see “Active slide” on page 30)
2. Duration is displayed
3. Max Cost is displayed (when set)
Emergency calls
In an emergency, you can make an emergency call
by dialling the international emergency number 112
which is adopted by most countries. Even when SIM
is not attached in the phone, this function is available
in most networks (
F
).
In idle screen
1. Enter 112 with #,
2. Press C (Send)
Note: Making emergency calls without a SIM is country or network operator
dependent.