Filter
Top Products
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*7 This setting is available when you have the key finder (KX-TGA20FX). Read the installation
manual for more information on the key finder.
*8 For models with supplied key finders, the display shows “1:Finder1”.
*9 If you register 2 or more key finders.
*10 If you have 2 or more key finders.
*11 Wallpaper is displayed in the standby mode only when you select “Digital(Small)” or
“Off” for this setting.
*12 You can select to display either a single item or multiple items on one screen at a time for
the handset main menu icons in function menu, phonebook list, caller list, and redial list.
*13 You can set the handset display backlight while on charge.
– “On”: Backlight is on (dimmed).
– “Off”: Backlight turns off after 10 seconds of charging.
*14 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*15 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*16 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 32):
“Česká rep.” = “100 msec.”
“Slovensko” = “100 msec.”
*17 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*18 If you use your smartphone to copy images (used by your handsets as wallpaper patterns),
pictures (attached to your smartphone’s contacts), or ringtones, you can confirm handset
memory usage and erase unnecessary items to make more memory available.
For more information, refer to the Smartphone Connect App Guide, which is available for
download from our web site.
*19 If you store phone numbers in your smartphone’s contacts using the international dialling
symbol “+” and the country code, we recommend that you store phone number conversion
codes in the base unit.
For more information, refer to the Smartphone Connect App Guide, which is available for
download from our web site.
*20 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*21 This menu icon is displayed when the key finder is not registered.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 5 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
1 MMenuN (right soft key) #720
2 Select an alarm by pressing 1 to 5. a
MOKN
27
Programming
PRW110FX(en)_0724_ver012.pdf 27 2013/07/24 13:40:26