Filter
Top Products
3 MbN: Select the desired alarm option. a
MOKN
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4 Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N. a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (30 characters max.).
a MOKN
7 MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a MOKN
9 MOKN a M
N
Note:
R Press MStopN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or MSnoozeN to stop the
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1 MMenuN (right soft key) #238
2 MbN: Select the desired setting. a MOKN
R If you select “Off”, press M
N to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a MOKN
4 Enter the desired hour and minute you
wish to end this feature. a MOKN a
M
N
Changing the start and end time
1 MMenuN (right soft key) #237
2 Continue from step 3, “Turning night
mode on/off”, page 28.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select “No Ringing”,
the handset never rings during night mode.
1 MMenuN (right soft key) #239
2 MbN: Select the desired setting. a MOKN
a M
N
Selecting categories to bypass night
mode
1 MMenuN (right soft key) #241
28
Programming
PRW110FX(en)_0724_ver012.pdf 28 2013/07/24 13:40:26