Filter
Top Products
6 Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
N
Note:
R You can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 40).
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1 MMenuN (right soft key) #132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
MOKN
4 MbN: “Yes” a MOKN a M
N
Changing the unit’s region
setting/Resetting the base unit
1 MMenuN (right soft key) #136
2 MbN: Select the desired country. a MOKN
“Other” = countries except Czech and
Slovakia
“Česká rep.” = Czech
“Slovensko” = Slovakia
3 MbN: “Yes” a MOKN a M
N
Note:
R Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
Adding a new entry
1 MMenuN (right soft key) a
a MOKN
2 MbN: Select the desired date. a MOKN
3 MMenuN a MbN: “New Entry” a MOKN
4 Edit the date if necessary. a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (30 characters max.;
page 43). a MOKN
7 MbN: Select the desired alarm tone. a
MOKN 2 times
R You can select “Off” if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 M
N
Note:
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1 MMenuN (right soft key) a
a MOKN
2 To see the entries on the selected date,
press MOKN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: “Detail” a MOKN
Editing an entry
1 MMenuN (right soft key) a
a MOKN
2 MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Edit” a MOKN
4 Edit the date if necessary. a MOKN
5 Edit the time if necessary. a MOKN
32
Programming
PRW110FX(en)_0724_ver012.pdf 32 2013/07/24 13:40:26