Philips X600 Cell Phone User Manual


 
Business 55
Stopwatch
Your phone features a stop watch and the
minimum unit is 0.1 second.
The starting time is 00:00.0, in the format
“mm:ss.n”, where mm stands for minutes of the
watch, which can be any number from 0 to 59; ss
stands for seconds, a number between 0 and 59; n
stands for 0.x second, x being any number from 0
to 9. The stopwatch will start the timing when you
press
,
Start. You can pause the timing, press
,
Pause, to resume, press
,
Go, to stop the timing,
press
R
Stop.
Countdown
This feature is very similar to the alarm clock,
except that you will be alerted of the remaining
time, and the phone will emit an alarm at the end of
the count-down. The alarm tone is the same as
your alarm clock.
The minimum time is 1 minute. The format of the
time is hh:mm:ss, and the maximum time input is 23
hours 59 minutes 59 seconds.
You can edit the time timer and start the
countdown by pressing
,
Start. To stop
countdown, press
,
Pause, to reset, press
L
Reset. and you can exit the menu by pressing the
R
Back.
The count-down timer will switch on
automatically and emit an alarm at the end of
the count-down even if your phone is in idle
mode.
Unit converter
This application allows you to convert many types
of units such as exchange rate, area, energy, mass,
power, pressure, temperature and volume.
Select the type of unit and input the figure and then
press
,
Change to calculate the result.
Press
#
key to enter the decimal point.
Firewall
This function provides a simple and quick method
for you to avoid nuisance calls and SMS. Blacklist
contains a list of phone numbers from which you
do not wish to receive calls or SMS.
Select Business > Firewall > Set and choose between
the following options:
•Status: Status icon, Event or None.
•Activate: On or Off.