Filter
Top Products
17
Placing a Telephone Call
1. From the home screen on the FLX Dialer enter the
phone number to be called.
2. Once the number is entered completely, press the
green ‘call’ button to initiate the phone call.
3. If any Microphones are out of the Charger Base and
active, the call will default to ‘speaker mode’ and
will be identified by the ring tone being played out of
the Speaker.
4. If no Microphones are available then the call will
default to ‘handset mode’ and the call will take
place on the FLX Dialer.
Answering an Incoming Telephone Call
1. When the FLX2 System identifies an incoming call,
it will play the ring tone through the FLX Speaker. If
the Dialer is not in the Charger Base it will also play
a ring tone.
2. If your phone line supports caller ID, and the caller
has not suppressed their caller ID information, the
FLX Dialer will display the caller ID information for
the incoming call.
3. A call can be answered in one of three fashions.
a. Press the Green ‘Call’ button or the ‘Answer’
key on the FLX Dialer.
b. Remove a Microphone from the charger.
c. Press the mute/unmute button on a
Microphone that is already out of the
charger.
Note: If there is either no Speaker or no Microphones active
and available when the incoming call is answered from the
FLX Dialer, the call will default to ‘handset mode’ and will
remain in ‘handset mode’. The call can only be switched to
‘speaker mode’ on the FLX Dialer if at least one Microphone is
out of the Charger Base and switched on and the Speaker is
switched on.