Filter
Top Products
24
Making a call via Bluetooth
1. With the Bluetooth connection enabled, dial a number from the Bluetooth device.
The call will be conducted using the FLX Speaker and Microphones.
Answering a call via Bluetooth
1. You can answer a Bluetooth call either directly from your FLX system only if at
least one microphone is out of the charging bay, and switched on. If answering
the call with the FLX system it will automatically be in speaker mode.
2. If you answer the call using your Bluetooth device, settings on that device will
determine whether the call will be answered as a speaker call using the FLX
Conference Phone, or as a call using other audio devices. If you want to have a
private call not using the FLX as the Speaker of the call, ensure that you select
the correct audio output device in your Bluetooth enabled device.
Video Conference Collaboration
The FLX2 System is equipped with balanced analog audio input and output to be
connected to 3
rd
party video or PC conferencing system. This allows the FLX
Microphones and Speaker to be used as Microphones and Speaker for the video call. It
also provides Acoustic Echo Cancelation and Noise Control to the video call.
Connecting a Video Conference System
In the advanced audio setting (see page 35), change the Aux Audio setting for Aux Out
to MIC. Then connect one of the AUX OUT on the FLX2 Base Station via an
appropriate mono balanced or unbalanced cable with 3.5mm plugs to the ‘Mic Input’ on
the video conference system.
The line level audio AUX IN on the FLX2 Base Station should be connected, via the
appropriate mono balanced or unbalanced 3.5mm cable, to the ‘line output’ of the video
conference system.
Configuring the Analog Audio
See page 32 on how to set the level for the AUX IN connector. This can be either
microphone level or line level.
See page 35 on setting the volume for the AUX OUT connector.
Making a Video Call
The FLX2 System acts as a wireless Microphone, Speaker and mixer for the video
conference call. Once configured, a video call can be made using the 3
rd
party user
interface supplied with the video conference system. Simply remove the Microphones
from the charger to activate the analog audio input.