43
Device LED Indicator
Status
“All Mic Mute” is ON, all microphones muted
Flashing Yellow* – Red – Yellow* –
Green
Searching for a connection to the Base Station
Alternating slow Red - Green flash
Speaker is not paired to a Base Station
Off
Speaker is powered off:
o Speaker is not seated properly
o Charger tray is powered off
Speaker not in Charger Base
Off
Speaker is powered off
Green flash every second
o Connected, battery charged, microphones in
charger
o Connected, battery charged, Master Mute and
“All Mic Mute” are OFF
o Connected, battery charged, “All Mic Mute” is
ON, microphones unmuted
Red flash every second
Connected, battery charged, Master Mute or “All Mic
Mute” is ON, all microphones muted
Alternating Green – Yellow* flash
o Connected, battery low, microphones in charger
o Connected, battery low, Master Mute and “All Mic
Mute” are OFF
o Connected, battery low, “All Mic Mute” is ON,
microphones unmuted
Alternating long Red – Yellow* flash
Connected, battery low, Master Mute or “All Mic
Mute” is ON, all microphones muted
Flashing Yellow* – Red – Yellow* –
Green
Searching for a connection to the base
The speaker will try to re-establish the link
for about 5 minutes, then power off.
Alternating slow Red - Green flash
Speaker is not paired to a Base Station
The speaker will power down after two minutes.
Steady Red
o Speaker is being powered down
o Speaker is in pairing mode.
Rapid Red flashes continuing for
more than a few seconds
Radio congestion due to too many users or heavy
radio interference.
Groups of five rapid Red flashes
Speaker is in a fault condition.
Device LED Indicator
Status
Base Station
Long solid on, then a long solid off
Power On Boot Process
Double flashes every second
Operating Mode indicating that Base Station is
functional.
Skip every fifth double flash
Fault indication
Continuous Fast Flashing
Updating non-volatile memory as part of software
update
Off
No Power
* In some Speakers the LED Indicator color Yellow might look like Red.
Reset to Factory Defaults
See page 36 for a description on how to reset the FLX2 Conference Phone back to its
factory defaults.