Sagem myC-1 Cell Phone User Manual


 
13
Getting started
Installing the SIM card
Switch off your phone and disconnect the charger.
The SIM card is inserted beneath the phone’s
battery.
1 Turn the phone over and remove the rear cover by
pushing the lock button and inserting the nail in the
notch.
2 Take off the rear cover integrating the battery.
3 Slide the SIM card under the retaining plate, with
the gold-plated contacts facing towards the phone
and the cut-off corner pointed as shown on the
drawing in the phone.
4 Replace the cover by clicking in first the upper part
then the lower part.
5 Push the lock button to close your phone.
1
2
3
4
5
myC-1_en_02Getting started.pmd 22/12/2003, 16:1713