Filter
Top Products
Getting Started 7
3.
When the phone is completely charged ( ), unplug the
charger from the power outlet.
4. Remove the adapter from the phone by gently pulling the
connector out and replace the plastic cover over the open
jack.
Important!:
The battery charging function may stop if you are on a call while
charging your battery.
Note:
During charging, you must unplug the adapter before removing the
battery from the phone to avoid damage.
Low Battery Indicator
When the battery power is low and only a few minutes of talk
time remain, a warning tone sounds, the “Battery Low” message
repeats at regular intervals on the display, and the empty battery
icon ( ) blinks. The backlight turns off to conserve the
remaining battery power.
Note:
If your phone is in Silent Mode, the Low Battery Indicator defaults to
Vibration (see “Sound Profile” on page 48.). If you change the alert
from Vibration to Mute, you will only see a flashing message
indicating a low battery.
If the battery level becomes too low, the phone automatically
turns off. Recharge your battery.
Turning the Phone On or Off
1. Press and hold the key or the key until the phone
power-on screen displays.
Note:
Do not turn on the phone when mobile phone use is prohibited.
2. If the phone asks, enter a password and press the OK soft
key or the key. (For further details, see “Change
Phone Password” on page 54.)
The Idle screen displays while the phone searches for your
network. The signal strength bars show adequate signal
after a network is found.
Note:
The display language is preset to Automatic at the factory. To change
the language, use the Language menu. (For more information, refer to
“Phone” on page 52..)
3. When you wish to switch off the phone, press and hold
the key until the power-off image is displayed.