Filter
Top Products
36
When settings are defined in the camera settings menu
(
Menu , ), the settings are permanently saved.
However, when settings are defined while the camera is in
preview mode (preparing to take a picture), the are only
active for the current camera session.
1. In standby mode, press the left soft key ( ) Menu, then
press , , . Off and On appear in the display.
2. Use the navigation key to highlight Off or On, then press
. You’re returned to the Settings menu.
When the flash is set to On, the flash icon ( ) appears in
the display in camera mode.
Change picture resolution
Change the size (in bytes) of your pictures using the
Resolution setting. Options are High, Medium, and Low.
The camera only takes pictures in Low resolution mode
(regardless of resolution setting) with Fun Frames enabled.
Tip: Change a photo’s resolution for the current camera
session (only) using the navigation up/down keys while in
camera mode.
1. In standby mode, press the left soft key ( ) Menu, then
press , , . The following options appear in the
display.
High
(VGA 640 X 480)
Medium (QVGA 320 X 240)
Low (QQVGA 160 X 120)
VerizonA670.book Page 36 Friday, February 27, 2004 7:29 AM