Filter
Top Products
Using Speed Dialing
With this feature,you can dial your favorite entries using one key press
for locations 2-9.(See “Assigning Speed Dial Numbers” on page 90.)
To use speed dial for voice calls:
ᮣ
From standby mode,press and hold the appropriate key for
approximately two seconds.
– or –
ᮣ
From standby mode,press the appropriate key and
press or .
The display confirms that the number has been dialed when it shows
“Connecting...”.
To use speed dial for PCS Ready Link calls:
ᮣ
From standby mode,press the appropriate key then press and
hold . (See “Setting Speed Dialing for PCS Ready Link
Entries” on page 143.)
The display confirms that the number has been dialed when it shows
“R-Link calling...”.
Note:Speed dialing is not available when you are roaming; when you are
roaming off the Sprint Nationwide PCS Network, you must always dial using
eleven digits (1 + area code + number).
Using Abbreviated Dialing
Abbreviated Dialing is another form of speed dialing.It allows you to
dial a number by entering just the last four digits of any number in your
Contacts directory.The Abbreviated Dialing option becomes available
when you enter the last four digits of a phone number and press .
To place a call using Abbreviated Dialing:
1. Dial the last four digits of a contact’s phone number.
2. Press to display the dialing options.
3. Highlight Abbrev. Dialand press , ,or .
Note:If there are more than two matched numbers in your Contacts list, the
number that comes first alphabetically will be dialed. If there is no matched
number, your phone dials the number you set for abbreviated dial with the last
4-digits you entered. See “Setting Abbreviated Dialing” on page 56.
Section 2A: Your PCS Vision Phone – The Basics 29