Filter
Top Products
Receiving a Ready Link Call
To receive a Ready Link call:
1. Make sure your phone’s Ready Link mode is enabled
(see “Setting Ready Link Mode” on page 202).
2. When you receive a Ready Link call from a contact, “R-
Link Call,” the contact’s name, and the Ready Link
number appear on the display. (You do not need to
take any action to answer the call.)
Ⅲ
When you receive a group call, “Group Call,” the
group member’s name, and the Ready Link
number appear.
3. If the person placing the call has kept the floor (held
the Ready Link/Memo button), you will see the
contact name and Ready Link number along with “has
floor,” and you will hear the caller speaking.
4. When the caller finishes speaking and releases ,
you will see “Floor is open.” on the display screen.
Press and hold to take the floor and reply to the
caller. (You will see “You have floor.” and hear a tone
confirming that you may speak.)
5. When the conversation is finished, press .
Tip:You can also receive a Ready Link call with the flip closed. Press and
hold the Ready Link button to take the floor when the floor is open.
Note:You can change the volume and the speaker setting during a
Ready Link call. Volume: Adjust the voice volume by using the Side Volume
key or by pressing the navigation key up or down except when you are
pressing and holding the Ready Link button. Speaker:Switch the speaker
on or off by pressing the Speaker button ( ).
Ready Link
Section 2K: Using Ready Link 211