Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP and email 45
• Passwd. request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS session,
select Automatic. If not, select GPRS only.
• IP address – the IP address that the phone uses when
communicating with the network. If you do not enter
an address, the network provides you with
a temporary IP address.
• DNS address – if the network does not provide the
IP address to the DNS server automatically,
you may enter it here.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
GSM settings include some settings that are
similar to GPRS settings and some which are
GSM specific as follows:
• Phone number – the phone number of your
Internet Service Provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analog or ISDN connection.
Note: If you want to change account type, you have
to create a new data account and select the account
type you want to use.
To create a data account manually
1. Scroll to Connect,
YES, Data comm., YES, Data
accounts,
YES, Add account?, YES.
2. Enter a name for the data account.
3. Select an account type.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
YES.
5. Scroll to Save?,
YES.
To edit a data account
1. Scroll to Connect,
YES, Data comm., YES, Data
accounts,
YES.
2. Select a data account,
YES.
3. Select Edit.
4. Select the setting you want to edit,
YES. Edit the
setting,
YES.
5. Repeat step 4 for other settings you want to edit.