Filter
Top Products
82
Section 6: Getting ConnectedSection 6: Getting Connected
Section 6: Getting ConnectedSection 6: Getting Connected
6.4 Using Wireless Modem
Wireless Modem activates your Sprint PCS Vision Smart Device as a
wireless modem and lets you connect your PC to a wireless network.
Before you create and configure a new modem using a connection,
you must install the drivers on your PC.
To establish a connection using Wireless Modem:
1. On your PPC-6700, tap Start > Programs >
Wireless Modem.
2. In the Connection Type list, select IrDA. This allows you to
connect your PPC-6700 via infrared to a PC.
3. Tap Start.
Set Up Your PC
Before you start using Wireless Modem with an IrDA connection,
you must configure a new modem on your PC and obtain the
Username and Password from your Internet service provider (ISP).
To configure a modem on your PC:
1. On your PC, select Start > Settings > Control Panel.
2. Double-click Phone and Modem Options.
3. On the Modems tab, click Add.
4. Select the Don’t detect my modem; I will select it from a
list check box.
5. In the Manufacturers list, select Standard Modem Types.
6. Select Standard 33600 bps Modem, and then click Next.
7. Select the modem port on which you want to install
the drivers.
8. Click Next.
9. Click Finish. Now, when you check the Modems tab in
the Phone and Modem Options dialog box, a Standard
33600 bps Modem appears in the modem list.