Filter
Top Products
Section 6: Getting ConnectedSection 6: Getting Connected
87
Section 6: Getting ConnectedSection 6: Getting Connected
Note:
Tap the Network Cards icon ( ) on the Wireless LAN
Settings screen to configure wireless networks and network
adapters.
To save battery power while connected to a
Wi-Fi network:
1. On the Settings tab of the Wireless LAN Settings screen,
move the Power Save Mode slider to a position that
optimizes performance with the least
power consumption.
2. Select the Auto turn off WLAN if not connected check box
to allow your PPC-6700 to turn off the WLAN function
automatically when no signal is detected.
To increase security of the Wi-Fi network:
The LEAP (Lightweight Extensible Authentication Protocol)
feature of Wireless Manager increases security on your device,
and ensures that nobody is able to access your network
without your permission.
1. On the Wireless Manager Settings screen, tap the
LEAP tab.
2. Tap New. By default, the LEAP screen displays data that
you entered previously. However, you can modify or delete
the data as required by tapping Modify or Delete.
3. Enter the SSID (Service Set Identifier), user name,
password, and domain.
4. Select an Authentication Type. By default, the setting for
your device is Open System
Note:
For LEAP to work correctly, both the access point and the re-
ceiving device (your device) must be set with the same SSID,
user name, and password.