Filter
Top Products
84
Section 6: Getting ConnectedSection 6: Getting Connected
Section 6: Getting ConnectedSection 6: Getting Connected
Connect Through a USB Port
To connect through a USB port, you need to first set up a USB
modem on your PC. Before setting up a USB modem, verify that
you have the following files:
PPC6700SP by Sprint Dialer.exe
PPC6700SP by Sprint.INF
Both files are available on the Getting Started CD. Run the
Getting Started CD from the CD-ROM of your PC and do the
following on your PPC-6700:
1. On your PPC-6700, tap Start > Programs > Wireless Modem.
2. Select USB as the connection type, and insert the USB
cable adapter.
3. Tap Start on the Wireless Modem screen of your PPC-6700.
The “Found New Hardware” message appears on your PC.
4. On your PC, select Display a list of the known drivers for this
device so that I can choose a specifific driver, and then
click Next.
5. Select Modem in the Hardware types list, and then click
Next.
6. Click Next.
7. Click Have Disk.
8. Click Next.
9. Select the recognized USB Modem from the Modems list.
10. Click Next.
11. Click Finish.
12. On your PC, select Start > Settings > Control Panel.
13. Double-click Phone and Modem Options.
14. Select the new USB modem from the Modems list.
15. Double-click the PPC6700SP by Sprint Dialer.exe file on the
Getting Started CD.