Telit Wireless Solutions GM882 Cell Phone User Manual


 
3
SAR CERTIFICATION
Like all radio transmitters, the Gm882 emits electromagnetic waves.
For users safety, the European Union Council has issued laws regarding the
SAR (Specific Absorption Rate), a limit below which users health is not
jeopardised in any way.
Studies and analyses which guarantee the absolute safety of users, whatever
their age or conditions of health, have provided the maximum value of 2 W/kg.
Users must bear in mind that the power radiated by the phone is not constant;
the GSM standard indeed states that for the telephone must use the minimum
power necessary for being connected to the nearest repeater.
The maximum level of the SAR reached in the most unfavourable conditions
and during the emission of the maximum power available with Gm882 is 0.735
W/kg.
INSERTING THE SIM CARD
To use your phone you must use a valid plug-in-shaped SIM card (small).
This card is given by the network operator or by the service provider.
Switch off the phone and remove the battery cover on the rear side.
Pull out the battery taking care not to pull the small cable that connects it to
the phone.
Free the sim-card holder by moving the metal clip to the right of the phone
and remove it.
Insert the SIM card into the card holder so that the connections are turned
towards the inner part of the phone; replace the sim-card holder and block it
with the metal clip.
Insert the battery into position and replace the removed cover.