Filter
Top Products
LCD Operation
Messages
Strata DK Digital Telephone 5/99 95
➤ To receive a notification message
➤ Press 0VJ.
➤ To cancel the message from the telephone that set the message
➤ Press [PDN] and dial ;;;, where XXX is the [PDN] of the telephone that set the
message.
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The busy
station can return a message to the calling station’s LCD. The two stations may continue this
procedure to carry on a “silent” conversation. Soft Keys must be OFF (
0RGH + ) at the
sending and receiving stations for this feature to operate.
➤ To send a message to a busy station
7. Press
3DJH.
8. Press
0RGH.
9. Press
. At the destination station, the LCD
displays the originating station
number and the
0VJ LED flashes.
1. When you receive a
busy tone, press
0RGH + .
210=[DN]
2. Enter the message
number.
Station message (10~19) and system
message (60~99). The LCD displays
the message. (This assumes the
message is already stored in memory.)
3. Press
3DJH. The destination station beeps four
times and the message displays for 30
seconds, or until you hang up.
MSG NO.?
MODE NO.?
SENT 207M
OVER TO ST210
MSG NO?