Toshiba Digital Telephone Cell Phone User Manual


 
36 Strata DK Digital Telephone 5/99
Features
Call Waiting
Call Waiting
You can answer a call that is transferred to your station, even when your station is busy. When
another call is camped onto your station, you hear two camp-on tone beeps and the [DN] or
Line LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have a [DN] or
/LQH
button available to receive the call, two camp-on tone beeps are sent to your telephone. You
must disconnect or transfer the existing call to answer the waiting call.
To answer a waiting call by placing the current call on-hold
...or if the station is
busy or does not
answer, hang up
The Line LED flashes green (on-hold). If you transferred the
call from a [DN], the [DN]’s LED turns off. The CO line or
[DN] camps on to the called station and the called station
receives a warning tone. The camped-on call rings when you
hang up.
...or to reconnect to
the transferred line
before it is answered,
press the flashing
/LQH or [DN] + .
The Line LED is a steady red when
the called station answers the
transferred call.
If the call is not answered after a
specified Recall time set in system
programming, camp-on is cancelled
and the transferred call rings back
(when your station or [DN] is idle or
sends two tone bursts if your
telephone is busy).
The LCD shows the CO line number
and the station number [203] where it
was originally transferred.
Press +ROG The existing call is placed on-hold. The camped-on line rings
your station (the Line LED flashes green - incoming call).
NO. 204
CAMP-ON 4
HOLD LINE 2
LN 2 RECALL 203