Toshiba Digital Telephone Cell Phone User Manual


 
Strata DK Digital Telephone 5/99 109
Access Codes A
This appendix contains access codes for outside Speed Dial numbers, CO lines, Paging Group
and Paging Zone Codes.
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a &2 or
/LQH button, you can enter the appropriate code listed in Table 12 to access an outside line.
You can also store the code on a Speed Dial (
6') button for one-touch access. If you are
storing a CO line access code onto a Speed Dial code, enter
 before the CO access code
(e.g., to store code
, enter ).
In some systems,
is used as a general group code or to access Least Cost Routing (LCR).
System users are required to dial
in order to access an outside line. If you press in a system
programmed with LCR, you may not hear internal dial tone, depending on system
programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Press [PDN] + CO Line Access Code
Table 12 CO Line Access Codes
System CO Line Access Codes
DK14
oraora
DK16e/DK16

oraor a
DK40i/DK40

oraor a