Filter
Top Products
Features
Voice Mail Integration
Strata DK Digital Telephone 5/99 73
➤ To assign a voice mail message mailbox number
Note This procedure is required for the initial storage of VM ID code to the Toshiba Voice
Mail system. Once programmed, these digits remain in memory until changed. To
change the code, repeat this procedure.
➤ To cancel the mailbox number
➤ Press [DN] + + 5HGLDO.
Message Retrieval
You can program a flashing 06* or [PhDN/MW] to automatically retrieve your voice mail
messages when it is pressed. Storing the message retrieval sequence in Steps 1~4 below is
required only once. It remains in memory unless cancelled or changed.
➤ To assign the message retrieval sequence
1. Press [DN] +
. You hear confirmation tone.
2. Enter the voice mail
ID code and the voice
mailbox [DN], plus
any required pauses
(up to 16 characters).
Example: for Toshiba voice mail
systems, enter
+ the mailbox
number.
203= mailbox number of the [DN] you
pressed in Step 1.
3. Press
5HGLDO. You hear a confirmation tone. The
LCD confirms the data storage.
1. Press [DN] +
. You hear a confirmation tone.
656 ID CODE SET
91203
DATA PROGRAMED
657 ID CODE SET