Filter
Top Products
80 Strata DK Digital Telephone 5/99
LCD Operation
Soft Keys
Soft Key Display
Abbreviated Soft Key feature prompts display on the LCD above the
Control buttons (
0RGH, 3DJH, and 6FUROO). In the following
example, you would press
0RGH for the TRNS function, 3DJH for
CONF and 6FUROO for PGE.
If the Soft Key feature is activated at your station, incoming call information does not display
on your LCD while your station is busy. To display this information, you must either
disconnect the existing call or place it on hold.
How to Use Soft Keys
This section provides an example of how to use Soft Keys to make a Conference call by
adding a station to an outside call. See “Soft Key Prompts” on Page 82 for a list of features
that can be accessed with Soft Keys.
Example: Using Soft Keys to Make a Conference Call
While on an outside call (
LINE 3) you initiated, your LCD displays the
prompts
ABR, CONF, and PGE during the first 30 seconds (if ABR does
not appear, then this feature was not assigned in system
programming).
Thirty seconds after the first digit of the telephone number is dialed,
the display changes to
TRNS, CONF, and PGE. If the call is an
incoming call, the
TRNS prompt appears immediately when you
answer the call.
➤ To Use Soft Keys to Make a Conference Calll
1. While on an outside
call, press
CONF
(
3DJH) to initiate the
Conference.
The outside call is placed on-hold.
(Optional) You can
press
RTRN (6FUROO)
to terminate the
operation and return
to the outside call.
TALK ON LINE 2
TRNS CONF PGE
TALK ON LINE 3
ABR CONF PGE
TALK ON LINE 3
TRNS CONF PGE
LINE OR STATION?
LINE STA. RTRN