Filter
Top Products
106 Strata DK Digital Telephone 5/99
Add-on Module/DSS Console
Features
Call Answering (CO Line)
If your DADM or DSS console is equipped with a /LQH button, you can answer CO line calls
from the DADM or DSS console as you would from a digital telephone. See Chapter 2 –
Features for detailed information.
➤ To answer an incoming CO Line call to a DADM or DSS Console
➤ Press the flashing /LQH.
Speed Dial
Your DADM or DSS console may be equipped with 6' (Speed Dial) buttons that can be
programmed to dial telephone numbers or to access features.
6' buttons on either the DADM
or DSS console function like
6' buttons on digital telephones. See Chapter 2 – Features for
information.
Paging
You can make an announcement page to a group of station telephone speakers selected in
system programming with
$OO &DOO 3DJH on the DSS console. 6' (if programmed) on either
the DSS console or the DADM can be used for page announcements. See “All Call Page” on
page 56.
Call Forward Override ([DSS] Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in system
programming to ring stations that are in the Call Forward mode, instead of being forwarded.
Usually the console’s telephone is the unit activated to perform this function. Among other
applications, this feature can be used to notify a person who forgets to deactivate the Call
Forward feature after returning to the office.
Important! DSS buttons on DADMs cannot override Call Forward.
➤ To override call forward with the console’s associated telephone
1. Press
&QI7UQ or
[PDN].
2. Dial the station
number set for call
forward.
Make the call as you would from any other station. This
procedure assumes your station has a typical program setting.