UTStarcom CDM 1080 Cell Phone User Manual


 
C
H
4
C
H
4
42
CONTACTS CONTACTS
43
In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the
second number.
SPEED DIALS
1
2
To assign a phone number to a location, select
the location then press [SET].
3
Select the contact with the Navigation Key then
press [OK]. To confirm, press [OK].
5
“SPEED DIAL SET” will be displayed.
4
To select “Yes” or “No”, press [OK].
“Unassigned” appears if the location is available.
To call an assigned number, press & hold the last digit of the
speed dial #.
ERASE GROUP
2
Select an existing group name with the
Navigation Key.
3
To select “Erase”, press [OPTIONS].
4
Select “Yes” to erase it, press [OK].
1
Press [MENU], then select “Contacts” menu,
then press “Groups”.
SEND PIX MSG. GROUP
1
Press [MENU], then select “Contacts” menu,
then press “Groups”.
2
Select an existing group name with the
Navigation Key.
4
Input “Text”, “Picture”, “Sound”, “Subject”,
then press [OPTIONS] to select “Preview”,
“Add Quick Text”, “Save As Drafts”, “Priority
Level”, “Remove Picture”, “Remove Sound”,
“Add Slide”.
5
3
To select “Send Pix Msg”, press [OPTIONS].
5.1. To send the pix message, press [SEND].
5.2. To save the pix message, press [OPTIONS]
then select “Save as Drafts”, then
press [OK].
Press [MENU], then select “Contacts” menu,
then press “Speed Dials”.