Turning the Phone On and Off
Turning the Phone On
1.
Install a charged battery or connect the phone to an
external power source such as the cigarette lighter
adapter or hands-free kit.
2.
Press for a few seconds until the red light on
the middle of the phone flashes.
Fully extend the antenna for the best performance.
As with any other radio device, avoid any unnecessary
contact with the antenna while your phone is on.
Turning the Phone Off
1. Press and hold until the display screen turns
off, then release the key.
2.
Protect the antenna by pushing it back into the phone,
if extended.
Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on.
If not, press .
2.
Enter the phone number, with area code, if needed.
3. Press .
18
CChhaapptteerr 22.. BBaassiicc FFuunnccttiioonnss
19
If the phone is locked, enter the lock code.
Call Failed indicates that the call did not go through
.
This phone has been restricted on the display
screen means that outgoing call restricted mode
is turned on.
If you want to turn off this function, take the
following steps.
Menu
6 Security Lock code insert 2
Restrict
No Ok
4. Press to disconnect the call.
Correcting Dialing Mistakes
If you make mistakes in dialing a number, press
once to erase the last entered digit or hold down
for at least two seconds to delete all digits, or simply
press Soft Key 2 Back to exit dialing state.
Receiving Calls
1.
When the phone rings, open cellcase, or if cellcase
is open, press any key (except , , ) to
answer.
To mute the ringer during a call, press or Side
Keys( ) once. The current call will stop ringing
or vibrating.
2. Press to disconnect the call.
In call waiting mode, the present call is put on hold as
you answer another incoming call.